Saftladen

High-Secure Bondage Anchor Mitts - lockable

€129,90 EUR

Sale Sold out

Taxes included. Shipping calculated at checkout.

Rigid, restrictive bondage mittens with locking mechanism!

Show your sub, slave or partner what it means to relinquish complete control. Or experience the feeling of absolute helplessness for yourself! The unyielding Saftladen Originals bondage mittens are designed for maximum restriction. They cannot be opened or unlocked from the inside with your hands. Once put on, the hands are stuck inside and are 100% immobile. You decide how long your sub will be unable to use his or her hands; two hours or two days, it's your decision. With the attached eyelets, you can also determine whether your sub is allowed to move or remains tied up.

The mittens are ideal for a bondage or BDSM session! You no longer have to worry about whether your sub can untie the knots of the rope or get hold of the key to the handcuffs.

The mittens are available in 5 different sizes (XXS, XS, S, M & L).

Simply click together and screw on
Stable fit and, of course, cannot be opened by hand from the inside.
Additional lock from the outside included in delivery

Please specify the desired size when ordering.

XXS:
A= 5,5 cm
B= 4 cm
C= 9 cm
D= 9,6 cm

XS:
A= 6 cm
B= 4,5 cm
C= 9,5 cm
D= 10 cm

S:
A= 6,5 cm
B= 5 cm
C= 9 cm
D= 10 cm

M:
A= 7 cm
B= 5,5 cm
C= 10 cm
D= 11cm

L:
A= 7,5 cm
B= 6 cm
C= 11 cm
D= 12 cm

Sizing – How to determine the correct mitten size

To ensure that the mittens fit perfectly, four measurements must be taken correctly: A, B, C and D.
Please take all measurements snugly, but without pressing into the skin. A simple ruler is ideal for measuring.
Then compare your measurements with the sizes listed (XXS–L).

Measurement A – Wrist width (decisive for the size!)

Measuring point: Directly behind the wrist bone.

Important:

This measurement is decisive in determining the right size.
The selected size may be no more than 5 mm larger than your measured value.
Never choose a smaller size, as the mitten will otherwise press on your wrist or cut into it uncomfortably.

Rule: A = may deviate by up to +5 mm, but never be smaller.

Measurement B – Wrist height

Measuring point: Also behind the wrist bone, perpendicular to the measuring line of measurement A.

Flexibility:

This measurement may be up to 5 mm larger or smaller than the measured value.
The area is more flexible, as the surrounding skin and muscles adapt well.
Rule: B = ±5 mm tolerance possible, no more.

Measurement C – fist width

Measurement point: width of the fist with the thumb tucked in, i.e. the position of the hand when wearing the mitten.

Flexibility:

This measurement is somewhat variable, as the fist can be adjusted slightly.
Deviations above or below are possible, provided that measurements A and B match the selected size.

Rule: C = variable within the sizes, slight deviations of up to 5 mm are not a problem (the greater the downward deviation, the tighter the mitten).

Measurement D – Fist height

Measuring point: From the transition at the wrist to the knuckles (see product image) while forming a fist.

Flexibility:

This value may vary, as the inner height of the mitten can be individually adjusted using the thread.
This allows you to decide whether the mitten should fit more snugly or more comfortably.

Rule: D = variable up to 2 cm, as the inner height is adjustable.

If you are unsure about the sizes, I will be happy to advise you, just send us a message.

Your order will be shipped as a neutral package with a tracking number.

Product Safety / product safety

___
Product materials
3D-printed accessories made of PLA plastic, chains, locks, spring tension pins, screws, bolts and threaded rods made of steel.

Product Categories
Adult products, including restraints, bondage mittens, collars and nipple clamps, and chains with fetish and erotic references.

Intended use: This product is exclusively intended for consensual use by adults (18+). These are bondage/BDSM accessories with fetish relevance.

Safety and Use Instructions
Not suitable for children or teenagers.
Only for adults (18+).

Applicable to collars offered:
The collar is exclusively designed as a decorative accessory for the BDSM and kink scene. It serves as an aesthetic addition to outfits or role-plays and is not suitable for functional purposes such as breath reduction, choking or impeding blood circulation.

No continuous use: Do not wear the collar for more than 15 minutes at a time and avoid a tight fit to prevent pressure marks or discomfort.

Applicable to all products offered:

Not for medical purposes: The collar is not a medical product and does not replace professional bondage equipment.

Do not use under the influence of alcohol, drugs or medication that may impair perception or responsiveness.

Use must never be unsupervised.
Before each use, carefully check the product for damage, cracks, cuts, deformations and the functionality of the clasps.

Protect from direct sunlight and heat.
Use in combination with other products is at your own risk.

The simultaneous use of self-bondage mitts and handcuffs is prohibited.

In case of pain, numbness, circulatory problems, breathing difficulties or other physical discomfort, discontinue use immediately.
Modifications, alterations or unintended use are at your own risk.

Disclaimer:
The manufacturer accepts no liability for improper use, misuse or resulting health damage. The responsibility for safe use lies solely with the user.

Disposal instructions:
In Germany, it can be disposed of with residual waste.
Different regulations may apply in other countries. Please inform yourself about the local disposal regulations and dispose of the product accordingly.

English verison:

Product materials:
3D-printed accessories made of PLA plastic, chains, locks, spring tension pins, screws, bolts and threaded rods made of steel.

Product categories:
Products for adults, including restraints, bondage mittens, collars and nipple clamps, and chains with fetish and erotic references.

Intended Use

This product is exclusively designed for consensual use by adults (18+). It is a bondage/BDSM accessory with fetish appeal.

Safety and Usage Instructions

General Warnings:

Not suitable for children or minors. For adult use only (18+).
Never use under the influence of alcohol, drugs, or medication that impairs perception or reaction time.
Never use unsupervised. Always ensure a trusted person is present who can intervene in emergencies.
Inspect before each use: Check for damage, cracks, cuts, deformations, and the functionality of closures.
Avoid direct sunlight and heat exposure (PLA is sensitive to high temperatures).
Modifications or misuse are at your own risk and may void safety guarantees.
Discontinue use immediately if you experience pain, numbness, circulation issues, breathing difficulties, or any physical discomfort.

Specific Warnings for Collars:

Decorative use only: This collar is designed as an aesthetic accessory for BDSM/kink scenes. It is not intended for functional purposes such as breath restriction, choking, or impeding circulation.
Avoid prolonged wear: Do not wear for more than 15 minutes continuously. Ensure a comfortable fit to prevent pressure marks or discomfort.

Specific Warnings for All Products:

Not a medical device: This product is not a medical or professional bondage tool. Use at your own discretion.
Combination risk: The simultaneous use of self-bondage gloves and hand restraints is prohibited due to increased safety risks.
Use with other products at your own risk.

Liability Disclaimer

The manufacturer assumes no liability for improper use, misuse, or resulting injuries. Users are solely responsible for safe and consensual application.