Saftladen Originals
Second Chance Collar
Second Chance Collar
DE – €6.19 | UK/NO/CH – €26.99 | CA – €47.99 | US – €87 Ships within 5 working days
Couldn't load pickup availability
Too good to discard
These collars work perfectly. What sets them apart from a new one are scratches, signs of wear, or an inaccuracy in assembly that you can see but not feel. Material, mechanism and safety are unaffected.
That isn't enough for our standard for a new product. It's more than enough to wear.
- Full function and safety — nothing about the mechanism or closures has been altered
- Never worn — production pieces and display units, no customer returns
- The photos show examples; your piece will differ in detail
- All collars are 6 cm high
Note: different sizing rule than the current model.
This is an older version. Choose the collar to match your neck circumference, or at most 1–2 cm larger — no more. For the current TightReign Collar it's 2–3 cm; here the allowance is smaller.
What does Second Chance mean?
3D printing and hand assembly produce deviations we don't let through as new stock. Rather than setting these pieces aside, we offer them here. Three cases come together:
Cosmetic flaws. Scratches, visible print lines, colour variations, or an assembly inaccuracy with no effect on function. If a thread of glue stays on the outside during assembly, the collar is practically new — it just no longer meets our standard for new stock.
Discontinued versions. Colours and finishes making room for something new.
Display units. From trade fairs and events. Fully functional, but visibly used from frequent demonstration — heavier scratches are the rule here, not the exception.
So the range is wide: from "you have to look for it" to "you see it straight away". What you get depends on the individual piece.
Which size fits me?
Measure your neck circumference and choose matching, or at most 1–2 cm larger.
The set screws then let you decide how tightly it sits — from loose to very tight.
Measure snugly, but without pressing into the skin. A tape measure, or a piece of string measured against a ruler afterwards, is enough.
Not sure? Write to us. We'll help you find the right size before you order.
Safe use
This collar is designed as an accessory for the BDSM and kink scene. It is not suitable for functional purposes such as breath restriction, choking or impeding blood circulation.
- Do not wear for more than 15 minutes at a time
- Do not adjust too tightly — avoid pressure marks
- Never use unsupervised
- Before each use, check for damage and that the closures work
- Stop immediately in case of pain, numbness or breathing difficulties
- Do not use under the influence of alcohol, drugs or medication
The collar has two independent quick releases. How they work is described in the enclosed instructions — make yourself familiar with them before putting the collar on for the first time.
BDSM requires responsibility — use this toy with caution, respect and mutual consent.
Material & shipping
Material: 3D-printed plastic with steel fittings. Light, sturdy and comfortable to wear.
Version: All collars in this selection are 6 cm high.
Shipping: Your order ships as a neutral package with tracking. Nothing on the outside reveals the contents.
Product Safety / product safety
Product Safety / product safety
___
Product materials
3D-printed accessories made of PLA plastic, chains, locks, spring tension pins, screws, bolts and threaded rods made of steel.
Product Categories
Adult products, including restraints, bondage mittens, collars and nipple clamps, and chains with fetish and erotic references.
Intended use: This product is exclusively intended for consensual use by adults (18+). These are bondage/BDSM accessories with fetish relevance.
Safety and Use Instructions
Not suitable for children or teenagers.
Only for adults (18+).
Applicable to collars offered:
The collar is exclusively designed as a decorative accessory for the BDSM and kink scene. It serves as an aesthetic addition to outfits or role-plays and is not suitable for functional purposes such as breath reduction, choking or impeding blood circulation.
No continuous use: Do not wear the collar for more than 15 minutes at a time and avoid a tight fit to prevent pressure marks or discomfort.
Applicable to all products offered:
Not for medical purposes: The collar is not a medical product and does not replace professional bondage equipment.
Do not use under the influence of alcohol, drugs or medication that may impair perception or responsiveness.
Use must never be unsupervised.
Before each use, carefully check the product for damage, cracks, cuts, deformations and the functionality of the clasps.
Protect from direct sunlight and heat.
Use in combination with other products is at your own risk.
The simultaneous use of self-bondage mitts and handcuffs is prohibited.
In case of pain, numbness, circulatory problems, breathing difficulties or other physical discomfort, discontinue use immediately.
Modifications, alterations or unintended use are at your own risk.
Disclaimer:
The manufacturer accepts no liability for improper use, misuse or resulting health damage. The responsibility for safe use lies solely with the user.
Disposal instructions:
In Germany, it can be disposed of with residual waste.
Different regulations may apply in other countries. Please inform yourself about the local disposal regulations and dispose of the product accordingly.
English verison:
Product materials:
3D-printed accessories made of PLA plastic, chains, locks, spring tension pins, screws, bolts and threaded rods made of steel.
Product categories:
Products for adults, including restraints, bondage mittens, collars and nipple clamps, and chains with fetish and erotic references.
Intended Use
This product is exclusively designed for consensual use by adults (18+). It is a bondage/BDSM accessory with fetish appeal.
Safety and Usage Instructions
General Warnings:
- Not suitable for children or minors. For adult use only (18+).
- Never use under the influence of alcohol, drugs, or medication that impairs perception or reaction time.
- Never use unsupervised. Always ensure a trusted person is present who can intervene in emergencies.
- Inspect before each use: Check for damage, cracks, cuts, deformations, and the functionality of closures.
- Avoid direct sunlight and heat exposure (PLA is sensitive to high temperatures).
- Modifications or misuse are at your own risk and may void safety guarantees.
- Discontinue use immediately if you experience pain, numbness, circulation issues, breathing difficulties, or any physical discomfort.
Specific Warnings for Collars:
- Decorative use only: This collar is designed as an aesthetic accessory for BDSM/kink scenes. It is not intended for functional purposes such as breath restriction, choking, or impeding circulation.
- Avoid prolonged wear: Do not wear for more than 15 minutes continuously. Ensure a comfortable fit to prevent pressure marks or discomfort.
Specific Warnings for All Products:
- Not a medical device: This product is not a medical or professional bondage tool. Use at your own discretion.
- Combination risk: The simultaneous use of self-bondage gloves and hand restraints is prohibited due to increased safety risks.
- Use with other products at your own risk.
Liability Disclaimer
The manufacturer assumes no liability for improper use, misuse, or resulting injuries. Users are solely responsible for safe and consensual application.
Disposal Instructions
- In Germany, this product can be disposed of as residual waste (Restmüll).
